China Convenient Installation Compated Air Compressor for Medical Use manufacturer

Solution Description

Practical Installation Compated Air Compressor for Healthcare Use
Handy Set up Compated Air Compressor for Healthcare Use

Product Description

one. Description

  The compressed air is generated by the air compressor, enters the fuel storage tank via the aftercooler, and then gets rid of impurities, oil mist and humidity in the compressed air through the filter team and the adsorption dryer, and then is regulated by the pressure reducer. Compressed air ducts are utilised in health care equipment this kind of as running rooms and ICUs.

  The central compressed air station is composed of an air compressor, an aftercooler, a gas storage tank, a filter group, an adsorption dryer, an automatic handle cupboard, and an alarm. Typically it is a two-unit configuration, 1 for every single.

two. Why use dry, thoroughly clean compressed air?

IInhibit the survival and copy of germs
Avoid condensation into liquid h2o at reduced temperatures
Liquid water will damage these products soon after getting into the anesthesia equipment or ventilator
Prevent icing blocked pipes underneath zero
Substantial humidity in the pipe can result in oxidation of the pipe
 

3. Benefit
one.Oil-totally free design, guaranteeing the era of qualified medical air
two.Reduced tools failure frequency, saving costs 
three.Managed moisture content material, attaining substantial safety functionality
 

 four. ETR Clinic Compressed Air Generator  Working Principle

 
4.1 Health care Compressed Air Station Method Specifications

System Model  Air Compressor Purification controller Air tanks (M3) Output Consumption (M3/min) Output Stress (Mpa)
Model  Number Model  Amount
ETA-04 ET-YA041 1 ET-YK15 1 .three .41 .4-.six
ETA-07 ET-YA042 one ET-YK15 one .3 .82 .4-.6
ETA-eleven ET-YA043 one ET-YK26 one .6 1.23 .4-.6
ETA-fifteen ET-YA042 2 ET-YK26 one .six one.64 .4-.6
ETA-22 ET-YA043 two ET-YK38 1 1 2.forty six .4-.six
ETA-30 ET-YA043 3 ET-YK38 one 1 three.69 .4-.six

four.2 Air Compressor Requirements

Product

Output 

Consumption

 (M3/min)

Functioning strain (Mpa) Electricity

Energy

(KW)

L*W*H(mm) Fat(KG) Noise(dB)
ET-YA041 .forty one .6-.eight AC380V/50Hz/3P 4 1300×700×750 one hundred seventy 65±3
ET-YA042 .eighty two .6-.eight AC380V/50Hz/3P eight 1300×700×1350 255 65±3
ET-YA043 one.23 .6-.eight AC380V/50Hz/3P twelve 1300×700×1950 345 65±3

 four.3 Purification Controller Specifications

Model Ability (M3/min) Operating pressure (Mpa) Power 

Electricity

  (KW)

Dew Point (ºC) Excess weight (KG) L*W*H(mm) Noise(dB)
ET-YK15 1.5 .6-.eight AC220V/50Hz 30 </=-40 356 1300×900×1700 </=75
ET-YK26 2.six .6-.eight AC220V/51Hz 30 </=-40 374 1300×900×1700 </=75
ET-YK38 3.8 .6-.eight AC220V/52Hz thirty </=-40 412 1300×900×1700 </=75

 
five. High quality Manage Method
ETR Enigineering & Technology,clientele can be certain of the quality of ETR solution. ETR uses only the very best suppliers and parts. And  all compress air system are examined & commissioned by specialist Experts to make certain almost everything is certified just before they leave the factory.

 

Accessories

Air compressor
Air compressor from Atlas Copco, an international well-known model, very best maker of air compressor in the entire world, is adopt in all ETR PSA oxygen generator to provide greatest in-time soon after-income service to consumers all around the planet with low upkeep and least mend charge.

Refrigerate Air dryer
Refrigerate Air dryer with ideal, dependable performance from SMC, Japan, a international renowned brand, one of the very best maker of refrigerate air dryer in the globe, is undertake in all ETR PSA Oxygen Generator to achieve ideal pre-therapy for the compressed air.

Desiccant air dryer
Desiccant air dryer manufactured by CZPT Rand,  with substantial effectiveness and reliable performance is undertake if the user has rigid prerequisite on dew-point of produced oxygen fuel.

Air filters
Therapy for compressed air is really essential to the PSA oxygen generator. On-line compressed air filters produced by SMC are undertake to get rid of oil, dust, water in the compressed air.

Product oxygen filter
Micro organism removal filters produced by apureda will be adopt for item gasoline remedy to fulfill customer’s needs.

Instruments
Oxygen analyzer, pressure transmitter, oxygen flowmeter are regular components for ETR oxygen generator,  and all from China top supplier. Dew-level analyzer, glass flowmeter, CO analyzer, and many others. are optional.
Gas Monitoring Technique
This program can be monitored by the two on-website electric management cupboard and mobile telephone App. 

FAQ

 1. Are you manufacturer or Trade Organization?
   We are the manufacturer of compress air system, started in 2003.

 2. What is actually the order compress air technique  process?
   a. Inquiry—provide us all clear requirements.
   b. Quotation—formal quotation form with all clear specifications.
   c. Printing file— PDF, Ai, CDR, PSD, the photograph resolution must be at least three hundred dpi.
   d. Contract affirmation—supply proper deal details.
   e. Payment conditions— Negotiable.
   f. Creation—mass manufacturing
   g. Transport— by sea, air or courier. In depth image of bundle will be presented.
   h. Set up and commissioning

3.What conditions of payment you use?
   T/T, L/C and so forth.

US $6,000-30,000
/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Semi-Closed Type
Installation Type: Stationary Type

###

Customization:

###

System Model  Air Compressor Purification controller Air tanks (M3) Output Consumption (M3/min) Output Pressure (Mpa)
Model  Number Model  Number
ETA-04 ET-YA041 1 ET-YK15 1 0.3 0.41 0.4-0.6
ETA-07 ET-YA042 1 ET-YK15 1 0.3 0.82 0.4-0.6
ETA-11 ET-YA043 1 ET-YK26 1 0.6 1.23 0.4-0.6
ETA-15 ET-YA042 2 ET-YK26 1 0.6 1.64 0.4-0.6
ETA-22 ET-YA043 2 ET-YK38 1 1 2.46 0.4-0.6
ETA-30 ET-YA043 3 ET-YK38 1 1 3.69 0.4-0.6

###

Model

Output 

Consumption

 (M3/min)

Working pressure (Mpa) Power

Power

(KW)

L*W*H(mm) Weight(KG) Noise(dB)
ET-YA041 0.41 0.6-0.8 AC380V/50Hz/3P 4 1300×700×750 170 65±3
ET-YA042 0.82 0.6-0.8 AC380V/50Hz/3P 8 1300×700×1350 255 65±3
ET-YA043 1.23 0.6-0.8 AC380V/50Hz/3P 12 1300×700×1950 345 65±3

###

Model Capacity (M3/min) Working pressure (Mpa) Power 

Power

  (KW)

Dew Point (ºC) Weight (KG) L*W*H(mm) Noise(dB)
ET-YK15 1.5 0.6-0.8 AC220V/50Hz 30 </=-40 356 1300×900×1700 </=75
ET-YK26 2.6 0.6-0.8 AC220V/51Hz 30 </=-40 374 1300×900×1700 </=75
ET-YK38 3.8 0.6-0.8 AC220V/52Hz 30 </=-40 412 1300×900×1700 </=75
US $6,000-30,000
/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Semi-Closed Type
Installation Type: Stationary Type

###

Customization:

###

System Model  Air Compressor Purification controller Air tanks (M3) Output Consumption (M3/min) Output Pressure (Mpa)
Model  Number Model  Number
ETA-04 ET-YA041 1 ET-YK15 1 0.3 0.41 0.4-0.6
ETA-07 ET-YA042 1 ET-YK15 1 0.3 0.82 0.4-0.6
ETA-11 ET-YA043 1 ET-YK26 1 0.6 1.23 0.4-0.6
ETA-15 ET-YA042 2 ET-YK26 1 0.6 1.64 0.4-0.6
ETA-22 ET-YA043 2 ET-YK38 1 1 2.46 0.4-0.6
ETA-30 ET-YA043 3 ET-YK38 1 1 3.69 0.4-0.6

###

Model

Output 

Consumption

 (M3/min)

Working pressure (Mpa) Power

Power

(KW)

L*W*H(mm) Weight(KG) Noise(dB)
ET-YA041 0.41 0.6-0.8 AC380V/50Hz/3P 4 1300×700×750 170 65±3
ET-YA042 0.82 0.6-0.8 AC380V/50Hz/3P 8 1300×700×1350 255 65±3
ET-YA043 1.23 0.6-0.8 AC380V/50Hz/3P 12 1300×700×1950 345 65±3

###

Model Capacity (M3/min) Working pressure (Mpa) Power 

Power

  (KW)

Dew Point (ºC) Weight (KG) L*W*H(mm) Noise(dB)
ET-YK15 1.5 0.6-0.8 AC220V/50Hz 30 </=-40 356 1300×900×1700 </=75
ET-YK26 2.6 0.6-0.8 AC220V/51Hz 30 </=-40 374 1300×900×1700 </=75
ET-YK38 3.8 0.6-0.8 AC220V/52Hz 30 </=-40 412 1300×900×1700 </=75

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China Convenient Installation Compated Air Compressor for Medical Use     manufacturer China Convenient Installation Compated Air Compressor for Medical Use     manufacturer
editor by czh 2022-12-31