Tag Archives: air compressor copco

China Atlas Copco Xrhs666c Xrhs 666 C Cummins Portable Air Compressor 12v air compressor

Product Description

Atlas Copco Xrhs666c Xrhs 666 C CZPT Portable Air Compressor

mpressor Info

XAS67 Dd

   

Free Air Shipping and delivery @ Typical Operating Pressure

sixty two L/S (3,72 m³/min )

Normal Doing work Strain

seven bar

Minimum / Optimum Unloading Stress

two.9 / 8.7 bar

   

Compression Stages

one

Air Receiver Capacity

16.7L

Compressor Oil Potential

8 L

Approximate Air Outlet Temperature

90°C (Regular)

Common oil content material of compressed air

<5 mg/m³

   

Fuel Tank Potential

80L

Outlet Valve Configuration

3 x 3/4″ G, 1 x 1.5″ G

   

Nominal doing work problem

Inlet strain 1bar,Humidity0%,Temp20 °C

Seem Pressure Stage (ISO2125)

70dB(A) +/- three

   

Greatest Ambient Temperature at sea amount

forty five °C

Greatest Altitude

5000 m

Bare minimum Starting Temperature

-10 °C / -20 °C (with aid)

   

Diesel Engine Data

DEUTZ F3M2011

   

Horsepower Produced @ Rated Pace

32.5 kW

Cylinders

3

Cooling Method

Oil

Engine Coolant Potential

Engine Oil Ability

8.5 Liter

   

Unloaded Speed / Maximum Loaded Pace

1850 / 2400RPM

Gas Consumption @ % Load / a hundred% Load

2.7 / 6 kg/h

   

Dimensions

Standard Towing Pace twenty km/h

Duration

2970 mm ( within towbar )

Width

1410 mm

Peak

1258 mm

Bodyweight ( crammed with oil & coolant , Original gasoline )

850 kg

 

 

After-sales Service: Video Technical Support, Online Support, Spare PAR
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Cylinder Position: /
Structure Type: Open Type

###

Customization:

###

mpressor Data

XAS67 Dd

   

Free Air Delivery @ Normal Working Pressure

62 L/S (3,72 m³/min )

Normal Working Pressure

7 bar

Minimum / Maximum Unloading Pressure

2.9 / 8.7 bar

   

Compression Stages

1

Air Receiver Capacity

16.7L

Compressor Oil Capacity

8 L

Approximate Air Outlet Temperature

90°C (Standard)

Typical oil content of compressed air

<5 mg/m³

   

Fuel Tank Capacity

80L

Outlet Valve Configuration

3 x 3/4" G, 1 x 1.5" G

   

Nominal working condition

Inlet pressure 1bar,Humidity0%,Temp20 °C

Sound Pressure Level (ISO2125)

70dB(A) +/- 3

   

Maximum Ambient Temperature at sea level

45 °C

Maximum Altitude

5000 m

Minimum Starting Temperature

-10 °C / -20 °C (with assist)

   

Diesel Engine Data

DEUTZ F3M2011

   

Horsepower Developed @ Rated Speed

32.5 kW

Cylinders

3

Cooling System

Oil

Engine Coolant Capacity

Engine Oil Capacity

8.5 Liter

   

Unloaded Speed / Maximum Loaded Speed

1850 / 2400RPM

Fuel Consumption @ 0% Load / 100% Load

2.7 / 6 kg/h

   

Dimensions

Standard Towing Speed 20 km/h

Length

2970 mm ( within towbar )

Width

1410 mm

Height

1258 mm

Weight ( filled with oil & coolant , Initial fuel )

850 kg

After-sales Service: Video Technical Support, Online Support, Spare PAR
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Cylinder Position: /
Structure Type: Open Type

###

Customization:

###

mpressor Data

XAS67 Dd

   

Free Air Delivery @ Normal Working Pressure

62 L/S (3,72 m³/min )

Normal Working Pressure

7 bar

Minimum / Maximum Unloading Pressure

2.9 / 8.7 bar

   

Compression Stages

1

Air Receiver Capacity

16.7L

Compressor Oil Capacity

8 L

Approximate Air Outlet Temperature

90°C (Standard)

Typical oil content of compressed air

<5 mg/m³

   

Fuel Tank Capacity

80L

Outlet Valve Configuration

3 x 3/4" G, 1 x 1.5" G

   

Nominal working condition

Inlet pressure 1bar,Humidity0%,Temp20 °C

Sound Pressure Level (ISO2125)

70dB(A) +/- 3

   

Maximum Ambient Temperature at sea level

45 °C

Maximum Altitude

5000 m

Minimum Starting Temperature

-10 °C / -20 °C (with assist)

   

Diesel Engine Data

DEUTZ F3M2011

   

Horsepower Developed @ Rated Speed

32.5 kW

Cylinders

3

Cooling System

Oil

Engine Coolant Capacity

Engine Oil Capacity

8.5 Liter

   

Unloaded Speed / Maximum Loaded Speed

1850 / 2400RPM

Fuel Consumption @ 0% Load / 100% Load

2.7 / 6 kg/h

   

Dimensions

Standard Towing Speed 20 km/h

Length

2970 mm ( within towbar )

Width

1410 mm

Height

1258 mm

Weight ( filled with oil & coolant , Initial fuel )

850 kg

How to Repair and Maintain an Air Compressor

A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.

Positive displacement

Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
air-compressor

oil free

If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
air-compressor

double acting

A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
air-compressor

fuel tank pressure switch

You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.

energy source

The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.

China Atlas Copco Xrhs666c Xrhs 666 C Cummins Portable Air Compressor     12v air compressorChina Atlas Copco Xrhs666c Xrhs 666 C Cummins Portable Air Compressor     12v air compressor
editor by czh 2022-12-24

China Similar to Atlas Copco AC Industrial Heavy Duty Tier 3/4 Movable Portable Diesel Engine Direct Driven Rotary Screw Type Air Compressor with Jack Hammer manufacturer

Solution Description

The machine can fulfill the calls for of overloading use and stands up to the most extreme submitted surroundings. Meanwhile, it also can reduce gas use, which significantly lower down the operation expense. Subsided construction to set up the oil tank, put close to each one, Increase oil reserves, make the insert oil time interval more time, the fat on each sides are well balanced. Tank not in the circumstance, make the space much more and not only bring convenience to maintenance service, sound is decreased accordingly, but also offering the client a good value sensation. 
Edge: 
1. High Reliability
Less compressor areas, without wearing elements, so it is trustworthy, lengthy daily life, overhaul interval is up to forty to eighty thousand several hours. 
two. Easy Operation and Maintenance
A high diploma of automation, the operator does not have to go through a long time period of professional coaching, can accomplish unattended operation. 
3. The Power Balance is Good
There is no unbalanced inertia pressure, can easily high-speed procedure, can accomplish no fundamental operation, specially ideal for transportable compressors, modest dimension, light bodyweight, modest footprint. 
four. Strong Adaptability
With a mandatory gas transmission attributes, the quantity movement is practically totally free from the effect of exhaust force, in a wide range of velocity to sustain higher performance.  

Our SDP Collection:

Solution accessories:
one.Brand name Screw air end
Huge rotors,lower rpm,long life span
Higher efficiency,low sounds,low vibration,substantial dependability
Bearing life above a hundred,000 hrs
Little leakage triangle,low power/airflow ratio
Less donning areas,reduced routine maintenance value
two.Diesel engine
Large effectiveness air-cooling totally enclosed motor
Massive beginning torque
Reduced sound,far better construction
Original imported bearing
Minimal rpm
three.Model Intake Valve Assembie
Non-load starting up,butterfly inlet comtrolling valve
~100% stepless quantity regulation,aluminium alloy unibody casing
With Non-return price for weighty load,piston mover
Non-return benefit shut below urgent cease or electrical power failure
4.Air Filter
Air filter from Mann Hummel Germany
Dust removing ninety nine.9%,filtering fineness 3 μm
Ensuring the thoroughly clean air for inlet
Prolonging the life span of air system,massive size,over 3000 several hours
5.Oil Technique
Oil Filter from Mann Hummel Germany
Reliably eliminating the dust in oil
Oil fineness less then .1 μm
Guaranteeing the clearness and lubrication of oil program,very good cooling purpose

                    Make contact with particulars,
                    Firm identify:HangZhou CZPT Compressor Co.,Ltd
                    Firm deal with:No.172,Nanche Road,Xihu (West Lake) Dis.cheng district,HangZhou city.
                    Web site:http://compscompressor       
                    Product sales supervisor:Rick Zhang  
 

US $2,500-16,000
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

After-sales Service: 12 months
Warranty: 12 months
Lubrication Style: Lubricated

###

Customization:
US $2,500-16,000
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

After-sales Service: 12 months
Warranty: 12 months
Lubrication Style: Lubricated

###

Customization:

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China Similar to Atlas Copco AC Industrial Heavy Duty Tier 3/4 Movable Portable Diesel Engine Direct Driven Rotary Screw Type Air Compressor with Jack Hammer     manufacturer China Similar to Atlas Copco AC Industrial Heavy Duty Tier 3/4 Movable Portable Diesel Engine Direct Driven Rotary Screw Type Air Compressor with Jack Hammer     manufacturer
editor by czh 2022-11-29